BUGFIX:

1. [OCPP]: The problem that EVSE would still response with 'Accepted' even the
connector is in fault state when RemoteStartTransaction.Req doesn't contain
connectorId.
2. [OCPP]: checkCompositeSchedule 'validFrom' and 'validTo' logic.
3. [OCPP]: To make maintain server security profile setting become independent
from OCPP server

ADDED:

1. [ROOTFS]: PHP version upgrade from 8.1.12 to 8.2.4
2. [ROOTFS]: QCA7xxx driver upgrade script (/usr/bin/run_qca_upgrade.sh).
3. [UBOOT]: U-Boot write version info to secondary partition.
4. [GPL]: php, wget, openvpnn, tcpdump re-compile for downsize.
5. [KERNEL]: ipv6 NAT & iptable feature.
6. [SYSTEM]: Reduce command ack time for internal communication.
7. [SYSTEM]: Upgrade task added Upgrade_UART_AES() API.
8. [SYSTEM]: RFID communication detect logic.
9. [SYSTEM]: Install QCA driver automatically if cannot detect QCA driver.
10. [OCPP]: Configuration key 'UI_DefaultLanguage', 'TelecomRssi' and 'WifiRssi'.
(DC only).
11. [OCPP]: Configuration key value will keep current configuration value if key
version upgrade.
12. [OCPP]: Checking new URL set from backend is workable logic.
13. [OCPP]: Configuration keys 'OffLineMaxChargingCurrent' and related function.
14. [OCPP]: EVCCID info in periodEnergy.
15. [OCPP]: Checking new URL set from backend is workable logic.
16. [WEBSETTINGPAGE]: Add DefatulLanguage.
17. [WEBSETTINGPAGE]: Add hint when choosing insecure Wi-Fi.
18. [WEBSETTINGPAGE]: Webpage add export setting file include header info
function.
19. [WEBSETTINGPAGE]: Webservice account/permission and security function.
20. [WEBSETTINGPAGE]: Function of IEEE 2030.5.
21. [WEBSETTINGPAGE]: OfflineMaxChargePower and OfflineMaxChargeCurrent
setting item on Backend page.
22. [WEBSETTINGPAGE]: Config Wi-Fi to ethernet bridge

IMPROVED:

1. [UBOOT]: U-Boot version only write to flash if compare result different.
2. [GPL]: libwebsockets support ipv6.
3. [GPL]: php rebuild for enable session support.
4. [ROOTFS]: PPP dial script change ATE1 to ATE0.
5. [ROOTFS]: Disable root login on SSH / Terminal.
6. [ROOTFS]: move ppp/, u-blox_tools/ wpa_supplicant, uaputl from root/ to /bin
or /usr/bin for match cyber security.
7. [SYSTEM]: Query_Power_Consumption() function. Protection for power
consumption value.
8. [SYSTEM]: AT-Series does not support QCA700x detection.
9. [SYSTEM]: Module_Firewall rule add interface local Ip range.
10. [SYSTEM]: Combine NAND & eMMC write method for module task and control by condition compile command.
11. [SYSTEM]: StoreUsrConfigDate() function. For jump over the
CsuBootLoadFwRev size.
12. [SYSTEM]: All related to PowerConsumption , PresentChargedEnergy and
presentChargedEnergyPeriod changed to from float to double.
13. [SYSTEM]: Filter data and prevent data errors for internal communication.
14. [SYSTEM]: Turn off the RFID function, when ShmSysConfigAndInfo-
>SysConfig.isRFID = NO.
15. [SYSTEM]: GetCardSerialNumber() function. For response FAIL, PASS and
ERROR values.
16. [SYSTEM]: Disable display warning status code.
17. [SYSTEM]: upgrade check() function. accepted symbol "*".
18. [SYSTEM]: Show price consistency ----- => 000.00
19. [SYSTEM]: Improved PTB meter logic.
20. [SYSTEM]: upgrade_check() function. Transmit model name logic modification.
21. [SYSTEM]: Upgrade MCU function. Transmit model name logic modification.
22. [SYSTEM]: qca7000FlashCheck() function. Sleep 2 seconds after open QCA
power.
23. [SYSTEM]: Bridge ethernet to uap0 to get a dynamic IP address depending on
the "WifiToEth0Bridge " option.
24. [SYSTEM]: Compare MaxChargingCurrent & OfflineMaxChargeCurrent, when
ocpp is disconnected from the backend.
25. [OCPP]: Ping pong and Heartbeat timeout logics.
26. [OCPP]: Handle Reset Request logic.
27. [OCPP]: Send Local List Request logic.
28. [OCPP]: GetLog function for adding 'SecurityLog' logType logic.
29. [OCPP]: meterValue 'Energy.Active.Import.Register' and
'Energy.Active.Import.Interval' resolution to %.4f.
30. [OCPP]: sftp firmware download logic.
31. [OCPP]: SignedFirmwareUpdate verification logic to avoid errors being not
detected.
32. [OCPP]: Disable IPv6 option of connecting websocket server to avoid
handshaking fail problem.
33. [OCPP]: Configuration key 'ChargingScheduleMaxPeriods' value from 10 to 20.
34. [OCPP]: PowerConsumption related parameter type from float to double.
35. [OCPP]: Improve and separate 'TxEnded' and 'TxUpdated' sampling logic.
36. [OCPP]: Improve the problem that first value of Energy.Active.Import.Interval
does not reasonable since the PowerConsumption synchronization failure during bootup initialization step.
37. [OCPP]: GetConfigurationKey logic for 'OcppServer' and 'MaintainServer'.
38. [OCPP]: Function to verify the certificate contained in
SignedFirmwareUpdate.req with ManufacturerRootCertificate.
39. [OCPP]: SignedFirmwareUpdate related logics.
40. [OCPP]: To make GetOcppSecurityProfile() returned value follow the setting of
webPage.
41. [OCPP]: Configuration keys 'OffLineMaxChargingPower' to sync with
shareMemory.
42. [OCPP]: StatusNotification logic to make the status should be 'SuspendedEVSE'
when the scheduled limit is 0 in charging process.
43. [OCPP]: Date time process improve for 2038 issue on 64 bits SoC.
44. [WEBSETTINGPAGE]: Private key upload check logic improves for ECDSA.
45. [WEBSETTINGPAGE]: Webpage validation info implement encrypted by AES256-CBC.
46. [WEBSETTINGPAGE]: Webpage implement web_log.php for record opeartion
log to file.
47. [WEBSETTINGPAGE]: Private key & certificate display fine tune.
48. [WEBSETTINGPAGE]: Login frozen time checking logic implement except time()
<= 120 to cover RTC reset to 1970-01-01 issue.
49. [WEBSETTINGPAGE]: switch_lang.php add check /Storage/user.db exist logic.
50. [WEBSETTINGPAGE]: if /Storage/user.db size smaller than default file, copy
default file to overwrite it.
51. [WEBSETTINGPAGE]: Auto copy rootCaMfi.pem to /Storage/OCPP if file does
not exist in folder.
52. [WEBSETTINGPAGE]: Limit of “OfflineMaxChargeCurrent” of AC series.
53. [4G]: ppp folder move from /root to /bin for cybersecurity issue.
54. [4G]: Module_4g APN configuration change to channel 3 if SIM is “Verizon”.
55. [4G]: THALES GPIO5 configuration command location change.
56. [4G]: THALES module adds data counter info to log.
57. [WIFI]: WIFI AP mode password change to can be set.
58. [WIFI]: Module_Wifi change path if call uaptul or wpa_supplicant in source
code.
59. [WIFI]: Load driver depend on kernel version

BUGFIX:

1. [OCPP]: The problem that EVSE would still response with 'Accepted' even the
connector is in fault state when RemoteStartTransaction.Req doesn't contain
connectorId.
2. [OCPP]: checkCompositeSchedule 'validFrom' and 'validTo' logic.
3. [OCPP]: To make maintain server security profile setting become independent
from OCPP server

ADDED:

1. [ROOTFS]: PHP version upgrade from 8.1.12 to 8.2.4
2. [ROOTFS]: QCA7xxx driver upgrade script (/usr/bin/run_qca_upgrade.sh).
3. [UBOOT]: U-Boot write version info to secondary partition.
4. [GPL]: php, wget, openvpnn, tcpdump re-compile for downsize.
5. [KERNEL]: ipv6 NAT & iptable feature.
6. [SYSTEM]: Reduce command ack time for internal communication.
7. [SYSTEM]: Upgrade task added Upgrade_UART_AES() API.
8. [SYSTEM]: RFID communication detect logic.
9. [SYSTEM]: Install QCA driver automatically if cannot detect QCA driver.
10. [OCPP]: Configuration key 'UI_DefaultLanguage', 'TelecomRssi' and 'WifiRssi'.
(DC only).
11. [OCPP]: Configuration key value will keep current configuration value if key
version upgrade.
12. [OCPP]: Checking new URL set from backend is workable logic.
13. [OCPP]: Configuration keys 'OffLineMaxChargingCurrent' and related function.
14. [OCPP]: EVCCID info in periodEnergy.
15. [OCPP]: Checking new URL set from backend is workable logic.
16. [WEBSETTINGPAGE]: Add DefatulLanguage.
17. [WEBSETTINGPAGE]: Add hint when choosing insecure Wi-Fi.
18. [WEBSETTINGPAGE]: Webpage add export setting file include header info
function.
19. [WEBSETTINGPAGE]: Webservice account/permission and security function.
20. [WEBSETTINGPAGE]: Function of IEEE 2030.5.
21. [WEBSETTINGPAGE]: OfflineMaxChargePower and OfflineMaxChargeCurrent
setting item on Backend page.
22. [WEBSETTINGPAGE]: Config Wi-Fi to ethernet bridge

IMPROVED:

1. [UBOOT]: U-Boot version only write to flash if compare result different.
2. [GPL]: libwebsockets support ipv6.
3. [GPL]: php rebuild for enable session support.
4. [ROOTFS]: PPP dial script change ATE1 to ATE0.
5. [ROOTFS]: Disable root login on SSH / Terminal.
6. [ROOTFS]: move ppp/, u-blox_tools/ wpa_supplicant, uaputl from root/ to /bin
or /usr/bin for match cyber security.
7. [SYSTEM]: Query_Power_Consumption() function. Protection for power
consumption value.
8. [SYSTEM]: AT-Series does not support QCA700x detection.
9. [SYSTEM]: Module_Firewall rule add interface local Ip range.
10. [SYSTEM]: Combine NAND & eMMC write method for module task and control by condition compile command.
11. [SYSTEM]: StoreUsrConfigDate() function. For jump over the
CsuBootLoadFwRev size.
12. [SYSTEM]: All related to PowerConsumption , PresentChargedEnergy and
presentChargedEnergyPeriod changed to from float to double.
13. [SYSTEM]: Filter data and prevent data errors for internal communication.
14. [SYSTEM]: Turn off the RFID function, when ShmSysConfigAndInfo-
>SysConfig.isRFID = NO.
15. [SYSTEM]: GetCardSerialNumber() function. For response FAIL, PASS and
ERROR values.
16. [SYSTEM]: Disable display warning status code.
17. [SYSTEM]: upgrade check() function. accepted symbol "*".
18. [SYSTEM]: Show price consistency ----- => 000.00
19. [SYSTEM]: Improved PTB meter logic.
20. [SYSTEM]: upgrade_check() function. Transmit model name logic modification.
21. [SYSTEM]: Upgrade MCU function. Transmit model name logic modification.
22. [SYSTEM]: qca7000FlashCheck() function. Sleep 2 seconds after open QCA
power.
23. [SYSTEM]: Bridge ethernet to uap0 to get a dynamic IP address depending on
the "WifiToEth0Bridge " option.
24. [SYSTEM]: Compare MaxChargingCurrent & OfflineMaxChargeCurrent, when
ocpp is disconnected from the backend.
25. [OCPP]: Ping pong and Heartbeat timeout logics.
26. [OCPP]: Handle Reset Request logic.
27. [OCPP]: Send Local List Request logic.
28. [OCPP]: GetLog function for adding 'SecurityLog' logType logic.
29. [OCPP]: meterValue 'Energy.Active.Import.Register' and
'Energy.Active.Import.Interval' resolution to %.4f.
30. [OCPP]: sftp firmware download logic.
31. [OCPP]: SignedFirmwareUpdate verification logic to avoid errors being not
detected.
32. [OCPP]: Disable IPv6 option of connecting websocket server to avoid
handshaking fail problem.
33. [OCPP]: Configuration key 'ChargingScheduleMaxPeriods' value from 10 to 20.
34. [OCPP]: PowerConsumption related parameter type from float to double.
35. [OCPP]: Improve and separate 'TxEnded' and 'TxUpdated' sampling logic.
36. [OCPP]: Improve the problem that first value of Energy.Active.Import.Interval
does not reasonable since the PowerConsumption synchronization failure during bootup initialization step.
37. [OCPP]: GetConfigurationKey logic for 'OcppServer' and 'MaintainServer'.
38. [OCPP]: Function to verify the certificate contained in
SignedFirmwareUpdate.req with ManufacturerRootCertificate.
39. [OCPP]: SignedFirmwareUpdate related logics.
40. [OCPP]: To make GetOcppSecurityProfile() returned value follow the setting of
webPage.
41. [OCPP]: Configuration keys 'OffLineMaxChargingPower' to sync with
shareMemory.
42. [OCPP]: StatusNotification logic to make the status should be 'SuspendedEVSE'
when the scheduled limit is 0 in charging process.
43. [OCPP]: Date time process improve for 2038 issue on 64 bits SoC.
44. [WEBSETTINGPAGE]: Private key upload check logic improves for ECDSA.
45. [WEBSETTINGPAGE]: Webpage validation info implement encrypted by AES256-CBC.
46. [WEBSETTINGPAGE]: Webpage implement web_log.php for record opeartion
log to file.
47. [WEBSETTINGPAGE]: Private key & certificate display fine tune.
48. [WEBSETTINGPAGE]: Login frozen time checking logic implement except time()
<= 120 to cover RTC reset to 1970-01-01 issue.
49. [WEBSETTINGPAGE]: switch_lang.php add check /Storage/user.db exist logic.
50. [WEBSETTINGPAGE]: if /Storage/user.db size smaller than default file, copy
default file to overwrite it.
51. [WEBSETTINGPAGE]: Auto copy rootCaMfi.pem to /Storage/OCPP if file does
not exist in folder.
52. [WEBSETTINGPAGE]: Limit of “OfflineMaxChargeCurrent” of AC series.
53. [4G]: ppp folder move from /root to /bin for cybersecurity issue.
54. [4G]: Module_4g APN configuration change to channel 3 if SIM is “Verizon”.
55. [4G]: THALES GPIO5 configuration command location change.
56. [4G]: THALES module adds data counter info to log.
57. [WIFI]: WIFI AP mode password change to can be set.
58. [WIFI]: Module_Wifi change path if call uaptul or wpa_supplicant in source
code.
59. [WIFI]: Load driver depend on kernel version

BUGFIX:

1. [OCPP]: The problem that EVSE would still response with 'Accepted' even the
connector is in fault state when RemoteStartTransaction.Req doesn't contain
connectorId.
2. [OCPP]: checkCompositeSchedule 'validFrom' and 'validTo' logic.
3. [OCPP]: To make maintain server security profile setting become independent
from OCPP server

ADDED:

1. [ROOTFS]: PHP version upgrade from 8.1.12 to 8.2.4
2. [ROOTFS]: QCA7xxx driver upgrade script (/usr/bin/run_qca_upgrade.sh).
3. [UBOOT]: U-Boot write version info to secondary partition.
4. [GPL]: php, wget, openvpnn, tcpdump re-compile for downsize.
5. [KERNEL]: ipv6 NAT & iptable feature.
6. [SYSTEM]: Reduce command ack time for internal communication.
7. [SYSTEM]: Upgrade task added Upgrade_UART_AES() API.
8. [SYSTEM]: RFID communication detect logic.
9. [SYSTEM]: Install QCA driver automatically if cannot detect QCA driver.
10. [OCPP]: Configuration key 'UI_DefaultLanguage', 'TelecomRssi' and 'WifiRssi'.
(DC only).
11. [OCPP]: Configuration key value will keep current configuration value if key
version upgrade.
12. [OCPP]: Checking new URL set from backend is workable logic.
13. [OCPP]: Configuration keys 'OffLineMaxChargingCurrent' and related function.
14. [OCPP]: EVCCID info in periodEnergy.
15. [OCPP]: Checking new URL set from backend is workable logic.
16. [WEBSETTINGPAGE]: Add DefatulLanguage.
17. [WEBSETTINGPAGE]: Add hint when choosing insecure Wi-Fi.
18. [WEBSETTINGPAGE]: Webpage add export setting file include header info
function.
19. [WEBSETTINGPAGE]: Webservice account/permission and security function.
20. [WEBSETTINGPAGE]: Function of IEEE 2030.5.
21. [WEBSETTINGPAGE]: OfflineMaxChargePower and OfflineMaxChargeCurrent
setting item on Backend page.
22. [WEBSETTINGPAGE]: Config Wi-Fi to ethernet bridge

IMPROVED:

1. [UBOOT]: U-Boot version only write to flash if compare result different.
2. [GPL]: libwebsockets support ipv6.
3. [GPL]: php rebuild for enable session support.
4. [ROOTFS]: PPP dial script change ATE1 to ATE0.
5. [ROOTFS]: Disable root login on SSH / Terminal.
6. [ROOTFS]: move ppp/, u-blox_tools/ wpa_supplicant, uaputl from root/ to /bin
or /usr/bin for match cyber security.
7. [SYSTEM]: Query_Power_Consumption() function. Protection for power
consumption value.
8. [SYSTEM]: AT-Series does not support QCA700x detection.
9. [SYSTEM]: Module_Firewall rule add interface local Ip range.
10. [SYSTEM]: Combine NAND & eMMC write method for module task and control by condition compile command.
11. [SYSTEM]: StoreUsrConfigDate() function. For jump over the
CsuBootLoadFwRev size.
12. [SYSTEM]: All related to PowerConsumption , PresentChargedEnergy and
presentChargedEnergyPeriod changed to from float to double.
13. [SYSTEM]: Filter data and prevent data errors for internal communication.
14. [SYSTEM]: Turn off the RFID function, when ShmSysConfigAndInfo-
>SysConfig.isRFID = NO.
15. [SYSTEM]: GetCardSerialNumber() function. For response FAIL, PASS and
ERROR values.
16. [SYSTEM]: Disable display warning status code.
17. [SYSTEM]: upgrade check() function. accepted symbol "*".
18. [SYSTEM]: Show price consistency ----- => 000.00
19. [SYSTEM]: Improved PTB meter logic.
20. [SYSTEM]: upgrade_check() function. Transmit model name logic modification.
21. [SYSTEM]: Upgrade MCU function. Transmit model name logic modification.
22. [SYSTEM]: qca7000FlashCheck() function. Sleep 2 seconds after open QCA
power.
23. [SYSTEM]: Bridge ethernet to uap0 to get a dynamic IP address depending on
the "WifiToEth0Bridge " option.
24. [SYSTEM]: Compare MaxChargingCurrent & OfflineMaxChargeCurrent, when
ocpp is disconnected from the backend.
25. [OCPP]: Ping pong and Heartbeat timeout logics.
26. [OCPP]: Handle Reset Request logic.
27. [OCPP]: Send Local List Request logic.
28. [OCPP]: GetLog function for adding 'SecurityLog' logType logic.
29. [OCPP]: meterValue 'Energy.Active.Import.Register' and
'Energy.Active.Import.Interval' resolution to %.4f.
30. [OCPP]: sftp firmware download logic.
31. [OCPP]: SignedFirmwareUpdate verification logic to avoid errors being not
detected.
32. [OCPP]: Disable IPv6 option of connecting websocket server to avoid
handshaking fail problem.
33. [OCPP]: Configuration key 'ChargingScheduleMaxPeriods' value from 10 to 20.
34. [OCPP]: PowerConsumption related parameter type from float to double.
35. [OCPP]: Improve and separate 'TxEnded' and 'TxUpdated' sampling logic.
36. [OCPP]: Improve the problem that first value of Energy.Active.Import.Interval
does not reasonable since the PowerConsumption synchronization failure during bootup initialization step.
37. [OCPP]: GetConfigurationKey logic for 'OcppServer' and 'MaintainServer'.
38. [OCPP]: Function to verify the certificate contained in
SignedFirmwareUpdate.req with ManufacturerRootCertificate.
39. [OCPP]: SignedFirmwareUpdate related logics.
40. [OCPP]: To make GetOcppSecurityProfile() returned value follow the setting of
webPage.
41. [OCPP]: Configuration keys 'OffLineMaxChargingPower' to sync with
shareMemory.
42. [OCPP]: StatusNotification logic to make the status should be 'SuspendedEVSE'
when the scheduled limit is 0 in charging process.
43. [OCPP]: Date time process improve for 2038 issue on 64 bits SoC.
44. [WEBSETTINGPAGE]: Private key upload check logic improves for ECDSA.
45. [WEBSETTINGPAGE]: Webpage validation info implement encrypted by AES256-CBC.
46. [WEBSETTINGPAGE]: Webpage implement web_log.php for record opeartion
log to file.
47. [WEBSETTINGPAGE]: Private key & certificate display fine tune.
48. [WEBSETTINGPAGE]: Login frozen time checking logic implement except time()
<= 120 to cover RTC reset to 1970-01-01 issue.
49. [WEBSETTINGPAGE]: switch_lang.php add check /Storage/user.db exist logic.
50. [WEBSETTINGPAGE]: if /Storage/user.db size smaller than default file, copy
default file to overwrite it.
51. [WEBSETTINGPAGE]: Auto copy rootCaMfi.pem to /Storage/OCPP if file does
not exist in folder.
52. [WEBSETTINGPAGE]: Limit of “OfflineMaxChargeCurrent” of AC series.
53. [4G]: ppp folder move from /root to /bin for cybersecurity issue.
54. [4G]: Module_4g APN configuration change to channel 3 if SIM is “Verizon”.
55. [4G]: THALES GPIO5 configuration command location change.
56. [4G]: THALES module adds data counter info to log.
57. [WIFI]: WIFI AP mode password change to can be set.
58. [WIFI]: Module_Wifi change path if call uaptul or wpa_supplicant in source
code.
59. [WIFI]: Load driver depend on kernel version

1. Modify smart allocate function, from 3KW to 20% for
fetch and 5kw to 30% for release
2. Extended GFD timing for communication and
termination stage
3. Remove the output power and current content of
the pre-feedback
4. Fix the problem that GFD will fail after emc occurs
while charging
5. System Optimization